August 2026
24 - 25 Aug 2026
2 Days
If your design will undergo any type of motion, the concepts presented in this course will equip you with knowledge critical to a successful design.
24 - 25 Aug 2026
2 Days
This course covers the use of Ansys LS-DYNA inside Workbench. Ansys LS-DYNA is useful for the analysis of problems involving contact, large deformation, nonlinear materials, transient response, and/or problems requiring explicit solutions.
Mon 24 Aug 2026
1 Day
Failure Mode and Effects Analysis (FMEA) is bottom up, inductive failure analysis that considers the effect that failure of lower level components and assemblies will have on the overall system. This technique is used across engineering to understand how systems can fail, the causes of failure and to identify the best ways to reduce risk.
Mon 24 Aug 2026
1 Day
Failure Mode and Effects Analysis (FMEA) is bottom up, inductive failure analysis that considers the effect that failure of lower level components and assemblies will have on the overall system. This technique is used across engineering to understand how systems can fail, the causes of failure and to identify the best ways to reduce risk.
24 - 26 Aug 2026
3 Days
The course includes configuring tools, fixtures and machining operations as well as learning how to create milling sequences, hole-making sequences and post process cutter location data to create machine code.
Tue 25 Aug 2026
1 Day
Solve heat transfer problems involving conduction, convection (forced and natural) and radiation, including heat transfer theory, the definition of thermal boundary conditions, and model selection and setup for radiation and natural convection.
25 - 26 Aug 2026
2 Days
This course will enable you to achieve and understand simulation analysis with contact, giving you the knowledge for preprocessing full solutions and post-processing.
Tue 25 Aug 2026
1 Day
Failure Mode Effect Analysis is most effective when developed by a multi-discipline team that is facilitated by a skilled chairman. It is important that the chairman guides the team through analysis and ensures that effort is focused on achieving workshop objectives. This course covers the essential skills required to lead effective FMEA workshops.
Tue 25 Aug 2026
1 Day
Failure Mode Effect Analysis is most effective when developed by a multi-discipline team that is facilitated by a skilled chairman. It is important that the chairman guides the team through analysis and ensures that effort is focused on achieving workshop objectives. This 1-day course covers the essential skills required to lead effective FMEA workshops.
25 - 26 Aug 2026
2 Days
This course is designed to provide an overview of the overall safety lifecycle of instrumentation and control systems important to safety at Nuclear Power Plants (NPPs), focusing on Nuclear Safety and Security.
25 - 26 Aug 2026
2 days, 9:00 AM - 5:00 PM
- Live online
- £1,260.00 excl. VAT
25 - 26 Aug 2026
2 days, 9:00 AM - 5:00 PM
PDSVISION UK Ltd is the first and only UK & Ireland Moldex3D Authorised Certification Centre. In this course, you will learn features, functionalities and workflows in Moldex3D using both eDesign and BLM meshes. The format of the course is a mix of theory and practical workshop exercises.
25 - 26 Aug 2026
2 Days
Reliability Engineering emphasises dependability in the lifecycle management of a product, where it is essential to consider the Reliability, Availability and Maintainability (RAM) characteristics. RAM analysis contains a number of techniques that help engineers understand the risks that will prevent dependable operation of a system by assessing failure modes, frequencies and consequences.
September 2026
1 - 2 Sep 2026
2 days, 9:00 AM - 5:00 PM
This course teaches the essential skills you will need to start performing basic computational fluid dynamics (CFD) simulations on your own using Ansys CFX software.
Tue 1 Sep 2026
1 Day
This course offers a comprehensive introduction to the fundamental principles of computational fluid dynamics (CFD) and its application in engineering analysis. Aimed at engineers and professionals new to CFD, or wanting to refresh their understanding, this one-day, lecture-based course will cover the essential concepts of fluid flow, heat transfer, and the underlying mathematical principles that govern these phenomena.
Tue 1 Sep 2026
1 Day
This course is intended for participants with little or no experience of using HAZOP as well as managers, supervisors, engineers and technicians with at least a little understanding of both engineering design and technical safety (for example, interlocks, permissives and trips). This includes for the system to be studied an understanding of: the engineering principles the design intent the design representation of the system being studied, for example a detailed assembly drawing and the modes of
Tue 1 Sep 2026
1 Day
Defective plastic parts are often only found late in the day and after significant investment of time and money. Our well-established course will help you develop an understanding of the causes of part defects and how to avoid them. Common plastic part defects will be explored and solutions developed, enabling attendees to design plastic parts with confidence.
Tue 1 Sep 2026
1 Day
Process Safety Management is a key leading indicator for plants which are exposed to hazards as a result of their operations. These hazards include flammable and explosive materials, high pressure, high and low temperatures, contaminants and toxic substances.
Wed 2 Sep 2026
1 Day
This course is for engineers who need to predict their design's fatigue life. Understanding basic concepts will allow the engineer to confidently perform these fatigue assessments. By calculating stresses using either traditional methods or more complex finite element methods, you can ensure your design safely meets its intended design life.
Wed 2 Sep 2026
1 Day
Learning or reviewing the fundamentals of finite element analysis (FEA), including best practice, will enable you to get the most out of your own simulation software or assess the FEA undertaken by others with confidence.
8 - 9 Sep 2026
2 Days
New to Ansys Mechanical? This is the place to start. After completing this course you’ll understand the complete end-to-end procedure for conducting basic linear static structural analyses and will be able to apply it to the solution of your own analysis problems. Just as importantly, you’ll learn several techniques to improve the efficiency of your solutions and the fidelity of your results. You’ll also have a firm foundation for studying many advanced analysis techniques in Ansys Mechanical
8 - 10 Sep 2026
3 Days
This course is designed for users of Creo who want to enhance their product design with simulation and analysis to reduce costly physical prototyping. All whilst using the Ansys flagship solver without leaving the Creo Environment
8 - 9 Sep 2026
2 Days
This course is specifically design for Windchill administrators who are tasked with designing, implementing, and maintaining automated business processes within Windchill. This includes setting up approval processes, engineering change workflows, and other automated routing and task management.
Mon 14 Sep 2026
1 Day
This one-day course offers an introduction to core “Design by Analysis” principles taken from The American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Design Code (BPVC). It provides guidance on the use of Finite Element Analysis (FEA) simulation techniques to assess structural integrity. Aimed at engineers looking to ensure their designs are compliant with industry leading standards.