Upcoming Training & Events

Mon 26 Oct 2026

1 Day

Solve heat transfer problems involving conduction, convection (forced and natural) and radiation, including heat transfer theory, the definition of thermal boundary conditions, and model selection and setup for radiation and natural convection.

26 - 27 Oct 2026

2 Days

Reliability Engineering emphasises dependability in the lifecycle management of a product, where it is essential to consider the Reliability, Availability and Maintainability (RAM) characteristics. RAM analysis contains a number of techniques that help engineers understand the risks that will prevent dependable operation of a system by assessing failure modes, frequencies and consequences.

26 - 27 Oct 2026

5 hours

New features and enhancements in Part Modelling, Assembly, Drawing, Surfacing, Sheet Metal, Rendering along with Multi-Body Design and enhancements in the Mini Toolbar.

27 - 28 Oct 2026

2 days, 9:00 AM - 5:00 PM

PDSVISION UK Ltd is the first and only UK & Ireland Moldex3D Authorised Certification Centre. In this course, you will learn features, functionalities and workflows in Moldex3D using both eDesign and BLM meshes. The format of the course is a mix of theory and practical workshop exercises.

Tue 27 Oct 2026

0.5 Day

This is an introduction for Light Users of Windchill who need to find and display information.

Wed 28 Oct 2026

1 Day

Covers the new features and functionality in Creo Parametric

Thu 29 Oct 2026

0.5 Day

For new users who want to learn how to manage Creo data in Windchill.

Mon 2 Nov 2026

1 Day

Ansys Fluent offers a range of models for multiphase flow simulation which can help you to understand multiphase flow phenomena in your application.

2 - 3 Nov 2026

2 Days

New to Ansys Mechanical? This is the place to start. After completing this course you’ll understand the complete end-to-end procedure for conducting basic linear static structural analyses and will be able to apply it to the solution of your own analysis problems. Just as importantly, you’ll learn several techniques to improve the efficiency of your solutions and the fidelity of your results. You’ll also have a firm foundation for studying many advanced analysis techniques in Ansys Mechanical

2 - 3 Nov 2026

2 Days

This course will enable you to achieve and understand simulation analysis with contact, giving you the knowledge for preprocessing full solutions and post-processing.

2 - 6 Nov 2026

5 Days

For new users who need to quickly become proficient in all core aspects of using Creo, including part modelling, assembly design and detail drawing. Ideal for anyone new to 3D modelling.

2 - 6 Nov 2026

5 Days

For new users who need to quickly become proficient in all core aspects of using Creo, including part modelling, assembly design and detail drawing. Ideal for anyone new to 3D modelling.

Mon 2 Nov 2026

1 Day

Learning or reviewing the fundamentals of finite element analysis (FEA), including best practice, will enable you to get the most out of your own simulation software or assess the FEA undertaken by others with confidence.

Mon 2 Nov 2026

1 Day

Failure Mode and Effects Analysis (FMEA) is bottom up, inductive failure analysis that considers the effect that failure of lower level components and assemblies will have on the overall system. This technique is used across engineering to understand how systems can fail, the causes of failure and to identify the best ways to reduce risk.

Mon 2 Nov 2026

1 Day

Failure Mode and Effects Analysis (FMEA) is bottom up, inductive failure analysis that considers the effect that failure of lower level components and assemblies will have on the overall system. This technique is used across engineering to understand how systems can fail, the causes of failure and to identify the best ways to reduce risk.

Tue 3 Nov 2026

1 Day

This course is designed for electronics engineers seeking to learn antenna fundamentals, harness Ansys HFSS for antenna design optimisation, and assess installed performance, allowing for issues to be identified earlier in the design process.

Tue 3 Nov 2026

1 Day

This one-day course offers an introduction to core “Design by Analysis” principles taken from The American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Design Code (BPVC). It provides guidance on the use of Finite Element Analysis (FEA) simulation techniques to assess structural integrity. Aimed at engineers looking to ensure their designs are compliant with industry leading standards.

Tue 3 Nov 2026

1 Day

This course offers a comprehensive introduction to the fundamental principles of computational fluid dynamics (CFD) and its application in engineering analysis. Aimed at engineers and professionals new to CFD, or wanting to refresh their understanding, this one-day, lecture-based course will cover the essential concepts of fluid flow, heat transfer, and the underlying mathematical principles that govern these phenomena.

Tue 3 Nov 2026

1 Day

This course is for engineers who need to predict their design's fatigue life. Understanding basic concepts will allow the engineer to confidently perform these fatigue assessments. By calculating stresses using either traditional methods or more complex finite element methods, you can ensure your design safely meets its intended design life.

Tue 3 Nov 2026

1 Day

This course is intended for participants with little or no experience of using HAZOP as well as managers, supervisors, engineers and technicians with at least a little understanding of both engineering design and technical safety (for example, interlocks, permissives and trips). This includes for the system to be studied an understanding of: the engineering principles the design intent the design representation of the system being studied, for example a detailed assembly drawing and the modes of

Tue 3 Nov 2026

1 Day

Defective plastic parts are often only found late in the day and after significant investment of time and money. Our well-established course will help you develop an understanding of the causes of part defects and how to avoid them. Common plastic part defects will be explored and solutions developed, enabling attendees to design plastic parts with confidence.

Wed 4 Nov 2026

1 Day

The role of the Control Room Operator in managing risks of modern process plant is indisputable. Detecting deviations early, diagnosing the causes reliably and responding promptly and appropriately all contribute to the avoidance of major accidents and reduces reliance on automated systems. To do this, Control Room Operators need to maintain good situational awareness. Their ability to perform this critical role will depend on them being healthy and alert.

Wed 4 Nov 2026

1 Day

This comprehensive Electromagnetic Compatibility (EMC) course is designed to equip engineers and designers with the knowledge and skills needed to tackle EMC problems effectively, by covering foundational principles, design and simulation techniques, as well as regulatory requirements.

9 - 10 Nov 2026

2 days, 9:00 AM - 5:00 PM

This course teaches the essential skills you will need to start performing basic computational fluid dynamics (CFD) simulations on your own using Ansys Fluent software.

9 - 12 Nov 2026

4 Days

The certificate is aimed at those requiring an in-depth knowledge of the subject such that they may become lead practitioners within an organisation or embark on consultancy in the field.

9 - 11 Nov 2026

3 Days

For users that need to quickly become proficient in all core aspects of using Creo, including, part modelling, assembly design and detail drawing. Ideal for those with experience in other 3D CAD systems who are starting to use Creo Parametric.

9 - 11 Nov 2026

3 Days

For users that need to quickly become proficient in all core aspects of using Creo, including, part modelling, assembly design and detail drawing. Ideal for those with experience in other 3D CAD systems who are starting to use Creo Parametric.

Mon 9 Nov 2026

1 Day

Design for Reliability is a process that encompasses tools and procedures to ensure that a product meets its reliability requirements, under its use environment, for the duration of its lifetime. Design for Reliability is implemented in the design stage of a product to proactively improve product reliability, by seeking to minimise weaknesses in design.

Mon 9 Nov 2026

1 Day

Learn the fundamentals of creating stunning, photorealistic 3D renderings in KeyShot. No prior experience needed.

Tue 10 Nov 2026

1 Day

ReliaSoft ALTA is a powerful engineering software designed to facilitate accelerated life testing (ALT) data analysis using advanced life-stress relationship models. This introductory course equips participants with the essential skills needed to effectively utilize ALTA for comprehensive reliability analysis and prediction. The course provides an in-depth exploration of the ALTA interface and ALT theory, ensuring that users can implement ALT methodologies.

Tue 10 Nov 2026

1 Day

This advanced-level course is designed for experienced KeyShot users ready to push their rendering and animation skills further.

Tue 10 Nov 2026

1 Day

Alarm Systems Management is a concise one-day training course aimed at helping prevent accidents similar to the explosion and fires at the Milford Haven refinery in the UK in 1994. This serious incident injured twenty six people, caused damage of the order of €50 million and resulted in the loss of a large amount of production.

10 - 11 Nov 2026

2 days, 9:00 AM - 5:00 PM

This course teaches the essential skills you will need to start performing basic computational fluid dynamics (CFD) simulations on your own using Ansys CFX software.

Tue 10 Nov 2026

1 Day

Fault Tree Analysis is a top down, deductive failure analysis that identifies combinations of events that would lead to an undesired system event. This technique is mainly used in safety and reliability engineering to understand how systems can fail, to identify the best ways to reduce risk and quantify the probability of undesired events.

Tue 10 Nov 2026

1 Day

Fault Tree Analysis is a top down, deductive failure analysis that identifies combinations of events that would lead to an undesired system event. This technique is mainly used in safety and reliability engineering to understand how systems can fail, to identify the best ways to reduce risk and quantify the probability of undesired events.

Tue 10 Nov 2026

1 Day

Failure Mode Effect Analysis is most effective when developed by a multi-discipline team that is facilitated by a skilled chairman. It is important that the chairman guides the team through analysis and ensures that effort is focused on achieving workshop objectives. This course covers the essential skills required to lead effective FMEA workshops.

Tue 10 Nov 2026

1 Day

Failure Mode Effect Analysis is most effective when developed by a multi-discipline team that is facilitated by a skilled chairman. It is important that the chairman guides the team through analysis and ensures that effort is focused on achieving workshop objectives. This 1-day course covers the essential skills required to lead effective FMEA workshops.

10 - 11 Nov 2026

2 Days

Asset owners and their staff need to consider safety instrumented systems and safety instrumented functions as vital components within process safety. The risks to health, safety and the environmental are required to be reduced to an acceptable level, So Far As Is Reasonably Practicable (SFAIRP) or As Low As Reasonable Practicable (ALARP). It is also recommended that any commercial risk to companies should be reduced to acceptable levels for the relevant business.

Tue 10 Nov 2026

1 Day

Process Safety Management is a key leading indicator for plants which are exposed to hazards as a result of their operations. These hazards include flammable and explosive materials, high pressure, high and low temperatures, contaminants and toxic substances.

Tue 10 Nov 2026

1 Day

This course provides a simple and practical view and appreciation for the assurance of software and programmable elements. The scope covers the decomposition of software requirements and the traceability to demonstration of compliance.

Tue 10 Nov 2026

1 Day

This course provides a simple and practical view and appreciation for the assurance of software and programmable elements. The scope covers the decomposition of software requirements and the traceability to demonstration of compliance.

10 - 12 Nov 2026

3 Days

The essential course for individuals responsible for the day-to-day management and maintenance of the Windchill system who need to manage users, groups, basic system configurations, and data organisation within Windchill.

10 - 11 Nov 2026

2 Days

This course is specifically design for Windchill administrators who are tasked with designing, implementing, and maintaining automated business processes within Windchill. This includes setting up approval processes, engineering change workflows, and other automated routing and task management.

Wed 11 Nov 2026

0.5 Day

Learn how to create interactive, web-based product experiences using the KeyShot Web add-on.

16 - 17 Nov 2026

2 Days

Learn the fundamental skills necessary to unlock the power of nonlinear solutions in Ansys Mechanical. Understand the nonlinear solution algorithm and the end-to-end solution procedure that may be applied to all nonlinear analysis problems.

16 - 17 Nov 2026

2 Days

Is thermal management critical to your design? Are you concerned with the effects of heat on structures? This is the place to start. This course will help you develop the skills necessary to predict the thermal response of structures to various heat loads using Ansys Mechanical. You’ll learn complete solution procedures for conduction, natural convection, and radiation heat transfer under both steady-state and time-varying conditions.

16 - 17 Nov 2026

2 Days

This course covers the use of Ansys LS-DYNA inside Workbench. Ansys LS-DYNA is useful for the analysis of problems involving contact, large deformation, nonlinear materials, transient response, and/or problems requiring explicit solutions.

16 - 18 Nov 2026

3 Days

This course explores how to use advanced part modelling techniques, extending the knowledge required to design and parametrically control complex geometry. It will provide a significantly enhanced toolkit of options to further exploit design and modelling techniques further to introductory training.

16 - 17 Nov 2026

2 Days

This Intermediate course bridges the gap for all competent users who want to enhance their efficiency and understand all the other assembly tools which are still available without AAX

16 - 18 Nov 2026

3 Days

For users that need to quickly become proficient in all core aspects of using Creo, including, part modelling, assembly design and detail drawing. Ideal for those with experience in other 3D CAD systems who are starting to use Creo Parametric.

16 - 17 Nov 2026

1.5 Days

Learn how to develop 3D routing methods to generate full harnesses and flattened harness documented drawings.

Mon 16 Nov 2026

1 Day

Generative Topology Optimisation optimises the distribution of material within a defined domain, giving you a design that reduces excess material without sacrificing strength. Driving the creation of lighter and less expensive parts. Designs can be generated that are suitable for traditional manufacturing processes like casting and machining as well as for additive manufacturing.

16 - 20 Nov 2026

5 Days

For new users who need to quickly become proficient in all core aspects of using Creo, including part modelling, assembly design and detail drawing. Ideal for anyone new to 3D modelling.

16 - 18 Nov 2026

3 Days

This course is designed for new users who want to enhance their product design with simulation and analysis to reduce costly physical prototyping while increasing the products durability, reliability and safety.

16 - 18 Nov 2026

3 Days

DEFORM® is an engineering software that enables designers to analyse metal forming, heat treatment, machining, and mechanical joining processes on the computer rather than the shop floor. This introductory course equips you with essential skills to begin modelling metal-forming processes using DEFORM 2D & 3D simulation. It offers an in-depth exploration of the DEFORM interface and the knowledge needed for a broad range of applications.

Mon 16 Nov 2026

1 Day

Life Data Analysis (also called “Weibull analysis”) is a statistical technique that is used to understand the lifetime of products. Product life can be measured in hours, miles, cycles or any other metric that applies to the period of successful operation. This technique is used across engineering sectors to quantify lifetimes for all manner of things, as well as to understand how aging will influence performance. The models created can then be used to estimate important life characteristics of the product

Mon 16 Nov 2026

1 Day

For new users who want to learn how to manage Creo data in Windchill.

Mon 16 Nov 2026

0.5 Day

This is an introduction for Light Users of Windchill who need to find and display information.

Tue 17 Nov 2026

1 Day

Ansys Discovery is a great tool for rapidly generating results and comparing multiple design iterations. Its use is aimed at design engineers, rather than requiring expert analysts.

17 - 18 Nov 2026

2 Days

If your design will undergo any type of motion, the concepts presented in this course will equip you with knowledge critical to a successful design.

Tue 17 Nov 2026

1 Day

Get started with Creo Illustrate, PTC’s powerful tool for creating 3D technical illustrations and interactive visuals. This beginner-level course teaches you how to transform CAD models into clear, detailed graphics for service manuals, assembly instructions, and product documentation.

17 - 18 Nov 2026

2 Days

Learn how to create Sheetmetal parts using the suite of specific Creo Sheetmetal features.

17 - 18 Nov 2026

2 Days

This course is designed to provide an overview of the overall safety lifecycle of instrumentation and control systems important to safety at Nuclear Power Plants (NPPs), focusing on Nuclear Safety and Security.

17 - 18 Nov 2026

2 Days

This course will cover the core areas for you to start using PTC Mathcad with confidence.

Tue 17 Nov 2026

1 Day

Asset Performance Management (APM) is a process that encompasses tools and procedures to maintain or improve an assets’ reliability, maintainability and/or availability with respect to its requirements, under its use environment, for the duration of its lifetime. APM is intended to be applied to an asset in an operational environment. Whilst many elements are involved in APM, Reliability Engineering is a central element to success.

Tue 17 Nov 2026

1 Day

ReliaSoft RGA is a powerful engineering software designed to facilitate reliability growth analysis and repairable system analysis. This introductory course equips participants with the essential skills required to effectively utilize RGA for comprehensive reliability growth modeling and analysis. The course offers an in-depth exploration of the RGA interface, ensuring that users can proficiently implement reliability growth methodologies and optimize overhaul times in their professional work

Wed 18 Nov 2026

1 Day

This course is designed to provide knowledge about the optimization workflow in Ansys Workbench. The complete end-to-end procedure is shown from the original CAD to the final calculation of the optimized shape.

Wed 18 Nov 2026

1 Day

Learn how to create animations in Creo.

Wed 18 Nov 2026

1 Day

This course is designed for Creo users who want to quickly evaluate the fluid flow and heat transfer characteristics of their design, allowing for issues to be identified and optimisations to be made earlier in the design cycle.

Wed 18 Nov 2026

1 Day

Learn how to use model-based definition (MBD) to define models. With MBD all the necessary information to manufacture and inspect the product is captured within the 3D CAD model.

Wed 18 Nov 2026

1 Day

This course is designed for Creo users who want to quickly assess the mouldability and quality of their designs, discovering opportunities for improvement and driving better results earlier in the design process.