Upcoming Training & Events

22 - 23 Dec 2025

2 Days

Is thermal management critical to your design? Are you concerned with the effects of heat on structures? This is the place to start. This course will help you develop the skills necessary to predict the thermal response of structures to various heat loads using Ansys Mechanical. You’ll learn complete solution procedures for conduction, natural convection, and radiation heat transfer under both steady-state and time-varying conditions.

22 - 23 Dec 2025

2 Days

This course is designed to provide an overview of the overall safety lifecycle of instrumentation and control systems important to safety at Nuclear Power Plants (NPPs), focusing on Nuclear Safety and Security.

22 - 23 Dec 2025

2 Days

Reliability Engineering emphasises dependability in the lifecycle management of a product, where it is essential to consider the Reliability, Availability and Maintainability (RAM) characteristics. RAM analysis contains a number of techniques that help engineers understand the risks that will prevent dependable operation of a system by assessing failure modes, frequencies and consequences.

Mon 22 Dec 2025

1 Day

This training course is primarily aimed at individuals who are responsible for creating, managing and maintaining the engineering definition and structure of a product within Windchill.

22 - 23 Dec 2025

2 Days

This course is specifically design for Windchill administrators who are tasked with designing, implementing, and maintaining automated business processes within Windchill. This includes setting up approval processes, engineering change workflows, and other automated routing and task management.

6 - 7 Jan 2026

2 Days

Learn how to use Advanced Assembly Extension (AAX) functionality to enable and provide assembly Top-Down-Design Schemes using various tools as well as considering further aspects of data sharing within an assembly.

6 - 7 Jan 2026

2 Days

Learn how to create Sheetmetal parts using the suite of specific Creo Sheetmetal features.

Tue 6 Jan 2026

1 Day

This course is intended for participants with little or no experience of using HAZOP as well as managers, supervisors, engineers and technicians with at least a little understanding of both engineering design and technical safety (for example, interlocks, permissives and trips). This includes for the system to be studied an understanding of: the engineering principles the design intent the design representation of the system being studied, for example a detailed assembly drawing and the modes of

Wed 7 Jan 2026

1 Day

Process Safety Management is a key leading indicator for plants which are exposed to hazards as a result of their operations. These hazards include flammable and explosive materials, high pressure, high and low temperatures, contaminants and toxic substances.

12 - 13 Jan 2026

2 Days

Is thermal management critical to your design? Are you concerned with the effects of heat on structures? This is the place to start. This course will help you develop the skills necessary to predict the thermal response of structures to various heat loads using Ansys Mechanical. You’ll learn complete solution procedures for conduction, natural convection, and radiation heat transfer under both steady-state and time-varying conditions.

12 - 14 Jan 2026

3 Days

For users that need to quickly become proficient in all core aspects of using Creo, including, part modelling, assembly design and detail drawing. Ideal for those with experience in other 3D CAD systems who are starting to use Creo Parametric.

12 - 14 Jan 2026

3 Days

For users that need to quickly become proficient in all core aspects of using Creo, including, part modelling, assembly design and detail drawing. Ideal for those with experience in other 3D CAD systems who are starting to use Creo Parametric.

12 - 16 Jan 2026

5 Days

For new users who need to quickly become proficient in all core aspects of using Creo, including part modelling, assembly design and detail drawing. Ideal for anyone new to 3D modelling.

12 - 16 Jan 2026

5 Days

For new users who need to quickly become proficient in all core aspects of using Creo, including part modelling, assembly design and detail drawing. Ideal for anyone new to 3D modelling.

Mon 12 Jan 2026

1 Day

Defective plastic parts are often only found late in the day and after significant investment of time and money. Our well-established course will help you develop an understanding of the causes of part defects and how to avoid them. Common plastic part defects will be explored and solutions developed, enabling attendees to design plastic parts with confidence.

Tue 13 Jan 2026

1 Day

Alarm Systems Management is a concise one-day training course aimed at helping prevent accidents similar to the explosion and fires at the Milford Haven refinery in the UK in 1994. This serious incident injured twenty six people, caused damage of the order of €50 million and resulted in the loss of a large amount of production.

13 - 14 Jan 2026

2 days, 9:00 AM - 5:00 PM

This course teaches the essential skills you will need to start performing basic computational fluid dynamics (CFD) simulations on your own using Ansys Fluent software.

13 - 14 Jan 2026

2 Days

New to Ansys Mechanical? This is the place to start. After completing this course you’ll understand the complete end-to-end procedure for conducting basic linear static structural analyses and will be able to apply it to the solution of your own analysis problems. Just as importantly, you’ll learn several techniques to improve the efficiency of your solutions and the fidelity of your results. You’ll also have a firm foundation for studying many advanced analysis techniques in Ansys Mechanical

13 - 14 Jan 2026

2 Days

This course will enable you to achieve and understand simulation analysis with contact, giving you the knowledge for preprocessing full solutions and post-processing.

13 - 14 Jan 2026

1.5 Days

Learn how to develop 3D routing methods to generate full harnesses and flattened harness documented drawings.

Tue 13 Jan 2026

1 Day

Generative Topology Optimisation optimises the distribution of material within a defined domain, giving you a design that reduces excess material without sacrificing strength. Driving the creation of lighter and less expensive parts. Designs can be generated that are suitable for traditional manufacturing processes like casting and machining as well as for additive manufacturing.

Tue 13 Jan 2026

1 Day

Get started with Creo Illustrate, PTC’s powerful tool for creating 3D technical illustrations and interactive visuals. This beginner-level course teaches you how to transform CAD models into clear, detailed graphics for service manuals, assembly instructions, and product documentation.

Tue 13 Jan 2026

1 Day

This course is designed for Creo users who want to quickly assess the mouldability and quality of their designs, discovering opportunities for improvement and driving better results earlier in the design process.

Tue 13 Jan 2026

1 Day

This course is designed for Creo users who want to incorporate the use of simulation early in their design cycle through the power of GPU solving. Delegates will be introduced to performing studies in Creo Simulation Live covering structural, fluid, thermal and modal physics. Course content is flexible to suit your simulation requirements with time set aside to discuss specific needs and potential applications.

Tue 13 Jan 2026

1 Day

This course is for engineers who need to predict their design's fatigue life. Understanding basic concepts will allow the engineer to confidently perform these fatigue assessments. By calculating stresses using either traditional methods or more complex finite element methods, you can ensure your design safely meets its intended design life.

13 - 14 Jan 2026

2 Days

Asset owners and their staff need to consider safety instrumented systems and safety instrumented functions as vital components within process safety. The risks to health, safety and the environmental are required to be reduced to an acceptable level, So Far As Is Reasonably Practicable (SFAIRP) or As Low As Reasonable Practicable (ALARP). It is also recommended that any commercial risk to companies should be reduced to acceptable levels for the relevant business.

13 - 14 Jan 2026

2 Days

System Reliability Modelling is the analysis of a System to understand its reliability, availability, maintainability performance. This is done through breaking the system down into subsystems, assemblies and components and their arrangement. Common methods use logic diagrams, such as reliability block diagrams (RBDs) and fault trees. ReliaSoft BlockSim provides a comprehensive platform for system reliability, availability, maintainability and related analyses using exact computations.

Tue 13 Jan 2026

1 Day

This training course is primarily aimed at individuals who are responsible for creating, managing and maintaining the engineering definition and structure of a product within Windchill.

Tue 13 Jan 2026

1 Day

This course is designed for delegates with a basic understanding of reliability engineering and prediction methods. This course is aimed at new users of Windchill R&R who want to learn the capabilities of the tools and perform various types of reliability predictions

13 - 14 Jan 2026

2 Days

This course is specifically design for Windchill administrators who are tasked with designing, implementing, and maintaining automated business processes within Windchill. This includes setting up approval processes, engineering change workflows, and other automated routing and task management.

14 - 15 Jan 2026

2 days, 9:00 AM - 5:00 PM

This course teaches the essential skills you will need to start performing basic computational fluid dynamics (CFD) simulations on your own using Ansys CFX software.

Wed 14 Jan 2026

1 Day

Ansys Fluent offers a range of models for multiphase flow simulation which can help you to understand multiphase flow phenomena in your application.

Wed 14 Jan 2026

1 Day

This one-day course offers an introduction to core “Design by Analysis” principles taken from The American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Design Code (BPVC). It provides guidance on the use of Finite Element Analysis (FEA) simulation techniques to assess structural integrity. Aimed at engineers looking to ensure their designs are compliant with industry leading standards.

Wed 14 Jan 2026

1 Day

Learn how to create animations in Creo.

Wed 14 Jan 2026

1 Day

This course is designed for Creo users who want to quickly evaluate the fluid flow and heat transfer characteristics of their design, allowing for issues to be identified and optimisations to be made earlier in the design cycle.

Wed 14 Jan 2026

1 Day

Learn how to use model-based definition (MBD) to define models. With MBD all the necessary information to manufacture and inspect the product is captured within the 3D CAD model.

Wed 14 Jan 2026

1 Day

Fault Tree Analysis is a top down, deductive failure analysis that identifies combinations of events that would lead to an undesired system event. This technique is mainly used in safety and reliability engineering to understand how systems can fail, to identify the best ways to reduce risk and quantify the probability of undesired events.

Wed 14 Jan 2026

1 Day

Fault Tree Analysis is a top down, deductive failure analysis that identifies combinations of events that would lead to an undesired system event. This technique is mainly used in safety and reliability engineering to understand how systems can fail, to identify the best ways to reduce risk and quantify the probability of undesired events.

Wed 14 Jan 2026

1 Day

Life Data Analysis (also called “Weibull analysis”) is a statistical technique that is used to understand the lifetime of products. Product life can be measured in hours, miles, cycles or any other metric that applies to the period of successful operation. This technique is used across engineering sectors to quantify lifetimes for all manner of things, as well as to understand how aging will influence performance. The models created can then be used to estimate important life characteristics of the product

Wed 14 Jan 2026

1 Day

This course provides a simple and practical view and appreciation for the assurance of software and programmable elements. The scope covers the decomposition of software requirements and the traceability to demonstration of compliance.

Wed 14 Jan 2026

1 Day

This course provides a simple and practical view and appreciation for the assurance of software and programmable elements. The scope covers the decomposition of software requirements and the traceability to demonstration of compliance.

Thu 15 Jan 2026

1 Day

Learn how route 3D flexible and rigid pipes including fittings and library parts.

19 - 20 Jan 2026

1 Day

This course covers the use of Ansys LS-DYNA inside Workbench. Ansys LS-DYNA is useful for the analysis of problems involving contact, large deformation, nonlinear materials, transient response, and/or problems requiring explicit solutions.

19 - 28 Jan 2026

8 Days

The certificate is aimed at those requiring an in-depth knowledge of the subject such that they may become lead practitioners within an organisation or embark on consultancy in the field.

Mon 19 Jan 2026

1 Day

Covers the new features and functionality in Creo Parametric

19 - 21 Jan 2026

3 Days

This course explores how to use advanced part modelling techniques, extending the knowledge required to design and parametrically control complex geometry. It will provide a significantly enhanced toolkit of options to further exploit design and modelling techniques further to introductory training.

19 - 23 Jan 2026

5 Days

For new users who need to quickly become proficient in all core aspects of using Creo, including part modelling, assembly design and detail drawing. Ideal for anyone new to 3D modelling.